For safe and effective chainsaw operation having correct chain tension is necessary. As the chain wears, significant stretching will occur. After five to ten cuts a new chain may need to be readjusted. Separation from the guide bar or binding into the wood can occur if the chain is loose. Premature chain and guide bar wear will be caused by a tight chain. A chain that is well adjusted will move easily and smoothly when pulled by a gloved hand. Binding or sagging by the chain should not occur. The chain tension should be checked and adjusted if needed before every use.
A manual or automatic chain oiling system is used in most chainsaws. Friction and heat builds between the chain and guide bar without oil. The oil also helps the individual links in the chain operate smoothly at high speeds. Check the oiling system prior to every use.
Tighten all of the screws and fasteners. This chainsaw servicing should be done before every use. Before using your chainsaw each time you need to inspect the fuel system.
Service your chainsaw after only 10 hours use
After every 10 hours of use you need to clean or replace the air filter on your chainsaw. By replacing the air filter on a regular basis your chainsaw will be able to run cooler and use less fuel.
The chainsaw sprocket tip should be lubricated after every 10 hours of use. You will know that lubrication is complete when a small amount of grease appears at the edge of the guide bar near the sprocket.
For every 10 hours of use the chainsaw guide bar should be turned. Flip the guide bar over to promote an even wear pattern on the bottom and top of the bar. Inspect the chainsaw spark plugs after every 10 hours of use and cleaned or replaced as necessary.
For every 10 hours of use the spark arrester screen should be inspected and cleaned and replaced when necessary. The spark arrester screen prevents sparks from leaving the exhaust port and hurting the operator or falling on flammable materials.
The chainsaw fuel filter should be replaced after every 20 hours of use. Poor performance can result if the filter becomes clogged.
Service your chainsaw for performance and safety
To ensure the maximum performance perform the following procedures as needed to prolong the life of your chainsaw. Take your chainsaw to an authorized dealer if the carburetor needs adjustment. The chain blades should be sharpened periodically as they become dull.
AJB gardens is a first class soft landscaping service and garden maintenance services company that offers a wide range of specialist gardening services to both commercial and residential customers in Essex and Upminster.
AJB Tree Surgeon Service